Skip to content Skip to sidebar Skip to footer

Mounting a Door Drawer Sensor on Your Front Door: Tips from Caregiver Smart Solutions

Mounting a Door Drawer Sensor on Your Front Door: Tips from Caregiver Smart Solutions
Door Drawer Sensor on Your Front Door

How to properly mount a Caregiver Smart Solutions sensor on a front door

First and foremost, it’s important to make sure you have identified the door drawer sensor using the caregiver smart solutions app. Once you have done that, the majority of the sensor should be mounted on the door itself.

One tip to keep in mind is to orient the hole on the sensor downwards when mounting it on the door. This will make it easier to identify the sensor again in the future using the small tool.

It’s also a good idea to mount the sensor relatively high on the door. This will help to make the sensor as unobtrusive as possible and prevent it from being accidentally hit by a shoe or knee.

The smaller part of the sensor should be mounted on the molding, but be sure to place it close enough to the door without obstructing its use. To mount the sensor, simply peel the backing off the sticky part and adhere it to the door or molding. Make sure to align the tiny hash mark on the side of the sensor with the corresponding mark on the door or molding.

If you happen to have a storm door in front of your front door, you can still mount the door drawer sensor on the front door. Just be sure to mount it in the same way, aligning the hash marks as closely as possible and giving it a good push for a few seconds to ensure it stays in place.

If the door drawer sensor does happen to pop off, don’t worry. Simply snap the magnet back into the sensor and reattach the bottom of the body before sticking it back onto the door.

I hope these tips help you in properly mounting your door drawer sensor. Remember to orient the hole downwards, mount the sensor high, and align the hash marks for optimal placement and performance.

đź“ş See the full video here:

Meet Ryan Herd – he’s an accomplished author, patent holder, and TEDx speaker who has made a name for himself in the world of “smart” technology. However, his passion for this field goes beyond professional accolades. As a caregiver to his father, Ryan has firsthand experience of the challenges that caregivers face every day.

In response to these challenges, Ryan founded Caregiver Smart Solutions. Through his company, he offers a suite of tools designed specifically to help caregivers monitor their loved ones using non-invasive sensors. This approach ensures that proper care is always in place, giving caregivers like you more peace of mind and time back in your life.

Whether you’re looking to care for an aging parent or someone with a chronic condition, Caregiver Smart Solutions has you covered. Thanks to Ryan’s expertise and commitment to the well-being of caregivers and their loved ones, you can trust that you’re in good hands.

Leave a comment

Mounting a Door Drawer Sensor on Your Front Door: Tips from Caregiver Smart Solutions – Caregiver Smart Solutions

Helping caregivers monitor their loved ones as they age in place.

 

Office

Pompton Plains, NJ
07444

DISCLAIMER: The content, products, and services offered by Caregiver Smart Solutions™ are provided to educate consumers on healthcare issues and do not constitute the practice of any professional healthcare service. Nothing in such content, products, or services should be considered, or used as a substitute for, medical advice, diagnosis, or treatment. Caregiver Smart Solutions™ makes no representation or warranty that any particular service or product is safe, appropriate, or effective for you. If you have or suspect that you have a medical problem or condition, please contact a qualified healthcare professional immediately, or, if you are experiencing a medical emergency, call 911 for emergency medical help.

© 2024 by Caregiver Smart Solutions, Inc. United States

Skip to content